Canada is taking another step toward reducing the use of persistent synthetic chemicals in everyday products, with Health Canada proposing to withdraw food additive authorizations for two substances classified as per and polyfluoroalkyl substances, commonly known as PFAS. The October 29 proposal targets chloropentafluoroethane and octafluorocyclobutane, chemicals currently permitted for specific uses in certain foods. Although the move has been described as a revocation, the regulatory change is not yet final. Canadians and industry stakeholders have until January 27, 2027, to submit comments before the government decides whether to proceed.
The proposal is part of a broader Canadian strategy to address PFAS as a chemical class rather than regulating only a handful of well known compounds. Often called forever chemicals because many break down extremely slowly in the environment, PFAS have attracted growing international concern over their persistence, potential health effects and widespread presence in water, soil and consumer products. Canada’s latest action brings food additive regulation into that wider effort, while raising questions about how manufacturers will adapt and what the changes could mean for food production.
Which Two PFAS Chemicals Are Targeted?
The Health Canada proposal identifies chloropentafluoroethane and octafluorocyclobutane as the two substances under review. Both are included on Canada’s List of Permitted Food Additives with Other Purposes of Use. Their authorized functions include use as aerating agents and pressure dispensing agents in certain unstandardized foods.
Aerating agents help introduce or maintain gas in food products, while pressure dispensing agents support the release of products from pressurized containers. These functions can be relevant to particular food manufacturing and dispensing processes. The substances are permitted at levels consistent with good manufacturing practice, meaning manufacturers are expected to use only the amount needed to achieve the intended technical purpose.
Health Canada wants to remove the two entries from the permitted additive list. If the proposal is adopted and the list is formally changed, these substances would no longer be authorized for those food additive uses in Canada.
The distinction between a proposal and a completed regulatory decision matters. The government has opened a public consultation rather than announcing that the two authorizations have already been revoked. Businesses that use the substances should therefore monitor the regulatory process and prepare for a possible change, but the November 17 announcement does not mean that the proposed removals have already taken legal effect.
Why Canada Is Taking Action Against PFAS
PFAS are a large family of synthetic chemicals developed for properties such as resistance to heat, water, oil and stains. Their applications have included industrial processes, textiles, coatings, firefighting foams and certain materials used around food. The chemicals differ considerably in their structure and behaviour, so their potential risks are not identical.
What has made the wider PFAS family a major environmental concern is the persistence of many compounds. Some can remain in the environment for long periods, move through water and soil, and accumulate in living organisms. This persistence can make contamination difficult and expensive to address once chemicals have been released.
Research has associated exposure to certain well studied PFAS with health concerns that include changes in cholesterol levels, effects on the immune system, developmental effects and increased risks of particular diseases. The strength of evidence varies by chemical, exposure level and health outcome. It would be inaccurate to assume that every PFAS compound has the same toxicity or that the presence of a substance in a regulated food use automatically demonstrates that a particular food product is dangerous.
Canada’s approach reflects a broader concern about managing the chemical family as a whole. The federal government’s assessment under the Canadian Environmental Protection Act concluded that PFAS, excluding fluoropolymers as defined in the assessment, meet one or more criteria under section 64 of the legislation. The government is consequently developing risk management measures intended to address uses that are not considered necessary for the protection of health, safety or the environment.
Food Additives Are Part of a Wider Regulatory Strategy
The proposed removal of the two food additives forms part of the second phase of Canada’s PFAS risk management approach. This phase is intended to restrict uses that are not needed to protect health, safety or the environment. Food additives have been identified among the uses that may be addressed through this process.
The government is not relying on a single regulatory action. Canada has already introduced restrictions covering several well known PFAS groups, including PFOS, PFOA and long chain perfluorocarboxylic acids. Additional measures are being developed as authorities consider how to manage the wider family of substances and the products in which they are used.
The strategy is significant because PFAS have been used across many industries. Restricting one chemical in one application does not necessarily eliminate exposure from other products or environmental sources. A broader approach gives regulators a framework for examining different uses and prioritizing those that can be replaced without compromising essential functions.
For the food sector, the latest proposal sends a clear signal that existing authorizations may be reconsidered as scientific understanding and government policy develop. Food manufacturers, additive suppliers and importers may need to review product formulations, production equipment and supplier declarations to determine whether the two chemicals are used in relevant processes.
What the Proposal Means for Food Manufacturers
Companies that rely on chloropentafluoroethane or octafluorocyclobutane for an authorized food processing function will need to assess how a possible removal could affect their operations. That review may involve identifying where the substances are used, determining whether alternatives are available and checking whether changes would require new technical or regulatory approvals.
Manufacturers should not assume that a substitute can be introduced without further assessment. An alternative must perform the required function while meeting applicable food safety and quality standards. A replacement that changes texture, dispensing performance, product stability or manufacturing conditions may require additional testing before it can be used commercially.
Businesses that export food to Canada should also pay attention. Canadian food additive rules apply to products sold in the country, including imported foods. International suppliers may need to communicate with Canadian importers, review ingredient and processing information, and prepare for changes if the proposal becomes final.
Smaller food businesses could face particular challenges if they depend on suppliers for technical information or have limited resources to reformulate products. Clear communication between manufacturers, ingredient suppliers and regulators will be important during the consultation period.
Public Consultation Remains Open Until January 27, 2027
Health Canada published the proposal under reference number PFAA 2619 on October 29, 2026. The consultation period runs for 90 days, with written comments accepted until January 27, 2027.
Interested parties can submit scientific information, technical evidence and comments about the proposed removal. This gives manufacturers, researchers, industry associations and members of the public an opportunity to raise relevant considerations before a final decision is made.
Health Canada has explained that changes to the permitted food additive lists take effect on the day they are published on its website. If the proposal moves forward, the government says the outcome of the consultation will be communicated through a notice of modification published alongside the updated list.
The consultation is therefore more than a procedural step. It provides an opportunity for affected businesses to identify practical concerns, present relevant evidence and explain whether alternative substances or processes are available. It also allows regulators to consider information that may not have been addressed in the original proposal.
How the Canadian Move Fits Into International PFAS Controls
Canada’s action is part of a wider international movement to reduce the use and release of persistent chemicals. Governments in Europe and North America have introduced restrictions on selected PFAS, while regulatory agencies continue to assess their presence in consumer products, industrial materials and food contact applications.
In the United States, the Food and Drug Administration announced in 2024 that manufacturers had stopped selling certain PFAS containing grease resistant substances for use in food packaging. Those substances had been used in materials such as fast food wrappers, microwave popcorn bags and takeout containers. The American action involved food contact packaging, whereas Canada’s latest proposal concerns two substances authorized for particular food additive functions. The measures address related concerns but are not identical.
This distinction is important because discussions about PFAS in food can involve several different exposure pathways. Chemicals may be used as ingredients or processing aids, may be present in packaging materials, or may enter food through contaminated water, soil or other environmental sources. Removing an authorization for a food additive does not, by itself, eliminate every possible source of PFAS exposure.
Regulators must also balance risk reduction with practical considerations. Some industrial and commercial uses may require more time to replace, while others can be phased out more readily. A successful approach depends on identifying safer alternatives, enforcing restrictions and preventing the transfer of avoidable chemical risks from one part of the supply chain to another.
What Consumers Should Know About Food Safety
For consumers, the proposal is a regulatory development rather than a warning that ordinary food products have suddenly become unsafe. Health Canada has not announced a general recall or instructed Canadians to stop eating foods associated with the two substances. The government is proposing to remove specific permitted uses as part of a broader chemical management policy.
Consumers who want to understand the issue can focus on reliable information rather than assuming that every product or package contains PFAS. The presence, type and concentration of these chemicals vary widely. Exposure can occur through multiple environmental and consumer pathways, and the health implications depend on the specific substance and level of exposure.
People can follow regulatory updates through Health Canada’s official notices on food additive proposals and modifications. The federal government’s assessment of the state of PFAS in Canada also provides background on the chemical family, its uses and the reasons for broader risk management.
A Regulatory Proposal With Longer Term Implications
Canada’s proposal to remove chloropentafluoroethane and octafluorocyclobutane from its permitted food additive list is a targeted measure within a much larger effort to address persistent synthetic chemicals. It does not yet constitute a final revocation, but it signals that the government is prepared to reconsider established uses as part of its wider PFAS strategy.
The coming consultation period will give industry and the public an opportunity to contribute evidence before the government makes its decision. For food manufacturers, the immediate priority is to identify potential uses and assess replacement options. For consumers, the development offers another example of how chemical safety rules evolve as regulators examine long term environmental persistence and possible health effects.
The broader challenge will be ensuring that restrictions lead to meaningful reductions in exposure without creating new safety or manufacturing problems. That requires careful scientific review, transparent decision making and effective oversight across supply chains. Canada’s latest proposal is one step in that process, with its final significance depending on the evidence received and the regulatory action that follows.

