Troubleshoot Netgear Orbi Blue Light Issue

Instructional Guide to Troubleshoot Netgear Orbi Blue Light Issue

Experiencing the Netgear Orbi blue light issue has become quite common these days even when users have successfully completed the Orbi setup process via But, the good thing is that like every technical issue, it can be resolved if you walk through the hacks mentioned below. Thus, do the needful and learn how to bid farewell to the Troubleshoot Netgear Orbi Blue Light Issue in a matter of minutes.

Troubleshoot Netgear Orbi Blue Light Issue

  1. Reboot Your Netgear Orbi

Sometimes, all that a technical device needs in order to self-troubleshoot issues is a quick restart. Chances are that your WiFi device needs the same thing for itself.

Thus, follow the instructions mentioned below and learn how you can reboot your device:

  • Turn off your Netgear Orbi router.
  • Start counting and stop when required.
  • Turn on your Orbi.

Now, check if you are able to troubleshoot the Netgear Orbi blue light issue with this hack.

  1. Eliminate WiFi Interference

Keeping WiFi interference has also helped many users to resolve technical issues. Perhaps, it might help you too. Therefore, eliminate WiFi interference from the root. Wondering how you can do that? Well, that can be done by changing the location of your Orbi.

While doing so, just ensure that mirrors, fish tanks, cordless phones, washing machines, baby monitors, Bluetooth speakers, televisions, microwave ovens, treadmills, refrigerators, aluminium studs, and utensils containing water are not kept near your Orbi router.

  1. Perform Orbi Firmware Update

Have you tried upgrading the firmware of your Netgear Orbi router? Not yet? Well then, the time has come to perform Netgear Orbi firmware update.

Here is how you can get down to the process:

  • Gain access to your PC or laptop.
  • Open up your favorite web browser.
  • Take the cursor to the URL field.
  • Enter
  • Log in to your Netgear Orbi router using the default admin details.
  • Select Maintenance > Firmware Update.
  • Follow the on-screen instructions.

After performing Netgear Orbi firmware update, if you are still facing the blue light issue, take the help of the 4th number hack.

  1. Change the Connection Source

Another thing that you can do to get rid of the Orbi blue light issue is to use a damage-free Ethernet cable to connect your Netgear Orbi router and the modem.

If doing so does not work for you, then take our advice and connect your devices using another source. Why don’t you give the wireless source a try?

  1. Pull Your WiFi Devices Closer

The last hack talked about switching to a different source to maintain a strong connection between the Netgear Orbi router and the existing modem. This one talks about bringing your devices closer.

Too much distance between your devices can completely ruin the performance of your Orbi router. To avoid that from happening any further, we recommended what we did.

  1. Reset Your Netgear Orbi

If after following the troubleshooting hacks, you are unable to rectify the Netgear Orbi blue light issue, then the time has come for you to reset your device.

The following steps will help in resetting your Netgear Orbi device:

  • Look at all sides of your Orbi.
  • Locate the Reset button.
  • The minute you find it, press it.
  • Wait patiently.

Now, use the orbilogin credentials to configure your Netgear Orbi router from scratch.

To Conclude

With that, we are putting an end to our guide based on troubleshooting the Netgear Orbi blue light issue. If the aforementioned hacks helped you in turning the blue light on your device to green, then it is recommended that let your fellow readers know this thing. Your one comment might be helpful to many. Thus, waste no more time shooting a comment.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *